Here are some frequently asked questions for LogiScope:
Yes. The official Apple Lightning adapter is compatible.
Yes. Touch and hold pause or play (in the bottom right corner) until it changes to single. Then, tap single. It will capture a single-shot waveform. Remember that in order to trigger off a specific event, it will need to be set to normal mode. If it is set to auto mode, it will just display the next frame, not the next event.
LogiScope is made for iOS. It requires iOS version 5.0 or newer.
Yes, LogiScope has a one year warranty. The logic harness and SMD grabbers are not included in warranty.
If you're using an iPhone / iPod touch, you can use LogiScope continuously for approximately four hours.
If you're using an iPad, you can use LogiScope continuously for approximately seven hours.
Please understand that these estimates are just that, estimates. Your results may vary based on your background usage level (WiFi, email push, other apps, etc).
Yes, you do need to install the app LogiScope. It is free and can be downloaded in the Apple App Store.
Yes, LogiScope is compatible. Keep in mind that it needs to be an official Apple adapter.
Compatible products include:
iPhone 7 Plus* iPhone 7* iPhone 6S Plus* iPhone 6S* iPhone 6 Plus* iPhone 6* iPhone 5C* iPhone 5S*
iPhone 5* iPhone 4S iPhone 4 iPhone 3GS iPad Pro* iPad mini 4* iPad mini 3* iPad mini 2* iPad mini* iPad Air 2* iPad Air* iPad 4* iPad 3 iPad 2 iPad iPod touch [3rd (32GB only], 4th and 5th* generation)
*With purchase of optional lightning adapter.
Although LogiScope is unable to capture a massive buffer for later review, it can provide live data with complex triggering. If you are looking for a particular event, searching for it using the advanced LogiScope triggering can be a simple and effective way vs panning and looking at event after event.
Input impedance: 10kohm Input capacitance: 7pF